Gamesupdate24 brings together accessible articles about technology, lifestyle, health, business, and entertainment.

How to properly clean your gaming peripherals

A gaming mouse, keyboard, headset and controller collect skin oils, crumbs and dust long before they look dirty. Knowing how to properly clean your gaming peripherals keeps surfaces smooth, sensors accurate and cables in good condition, while reducing the bacteria spread by shared desks and busy gaming sessions.

The basic rule is to separate routine dust removal from deeper cleaning. Start with the least aggressive method, use only moisture approved by the manufacturer and let every part dry fully before reconnecting power.

Prepare the workspace correctly

Unplug the device at the computer or console, remove controller batteries and wait for illuminated parts to cool. Photograph cable connections and note which buttons, pads or keycaps are removable. If a covered fault appears later, relevant consumer guarantees may apply under the Australian Consumer Law; GamesUpdate24's consumer law guide explains these rights and the importance of keeping purchase details.

Lay out a soft microfibre cloth, cotton buds, a soft brush and 70% isopropyl alcohol only if the maker permits it. Use air from a manual blower first. Compressed-air cans should stay upright and be sprayed in short bursts from about 15 centimetres away, because liquid propellant and tilted cans can damage electronics.

Many Australian gaming setups occupy a shared study or living room, where pet hair and takeaway drinks are everyday hazards. Replacement cables, controllers and other accessories are widely available from Australian retailers such as JB Hi-Fi, Centre Com and Officeworks, making it easier to use matching parts rather than improvising.

Clean the main input devices

For a gaming mouse, remove the battery or cable and use compressed air around the scroll wheel and underside. Wipe the shell with a barely damp cloth, then use a lightly damp cotton bud around buttons. Clean the optical sensor with a dry cloth; coatings or tape residue can make it track poorly. Replace worn feet instead of painting over them.

For a mechanical keyboard, switch it off and invert it over a towel. Release keycaps only with the correct puller, keeping stabilisers attached if the design requires it. Brush loose debris from the plate and use a damp cloth on compatible keycaps. A slightly damp cotton bud can lift grime from around a switch, but never flood the switch openings or spray cleaner directly onto them.

Controllers and headsets need a gentler approach. Remove batteries and ear cushions where possible, wipe the body with weak soapy water or an approved alcohol wipe, and use a cotton bud around thumbsticks and triggers. Do not soak fabric, leatherette or the speaker mesh. GamesUpdate24's technology coverage includes useful background on accessories and changing hardware standards.

Avoid common cleaning mistakes

Never use bleach, ammonia, household glass cleaner, magic erasers or a dishwasher on gaming equipment. These products can haze plastic, weaken adhesives and corrode metal. Keep liquids in a separate cup, away from the desk mat, and never pour water into a keyboard, controller or charging dock.

Climate matters in Australia. Humid conditions in Sydney and Brisbane can make greasy residue tacky, while dry, dusty homes in Canberra can push particles into tight switch and button gaps. Let moisture evaporate naturally instead of using a hot hairdryer, and keep damp gear away from strong sunlight, which can fade plastic and damage adhesives.

Before discarding a stained pad or ageing headset, check the maker's cleaning instructions and support page. Recent accessory launches and hardware changes are often tracked in GamesUpdate24's entertainment updates, while manufacturer guidance remains the authority for compatible cleaning methods.

Use a two-part maintenance checklist

Before cleaning:

  • Check the maker's guide and identify removable parts.
  • Unplug the device and remove all power sources.
  • Keep each peripheral labelled with its matching cable.
  • Test the device and photograph its condition first.

After cleaning:

  • Confirm every surface and charging port is completely dry.
  • Reconnect cables gently and test each input.
  • Remove debris from the work area and wash your hands.
  • Schedule the next wipe-down for the same day each week.

Keep a low-fuss care routine

A weekly wipe with a dry microfibre cloth handles fingerprints and skin oils. Use a soft brush around keys every fortnight, and check the mouse sensor, cable strain relief and battery contacts once a month. Keep drinks on a separate side table and avoid eating over the keyboard, especially during long online sessions.

Remove loose dust from vents and emptyings more often in a dusty room. Wash removable fabric covers only when the manufacturer allows machine washing, then air-dry them fully. Store unused controllers and adapters in a ventilated drawer rather than a sealed plastic bag, where trapped moisture may encourage corrosion.

Long sessions also deserve sensible breaks, and suitable footwear can make standing or stretching more comfortable; a gaming boot guide can help with fit. Keep footwear away from powerboards and cleaning liquids. The practical takeaway is simple: disconnect first, apply the minimum effective moisture, allow a full drying period and retest the device before every return to play.

A collage of gaming and digital media imagery in deep navy, white, red, and gold tones

Technology & news

Read about software, streaming, mobile devices, and everyday technology questions.

Read the latest news
A flat collage-style banner with bold navy, white, and gold geometric accents

Lifestyle, health & fashion

Find perspectives on daily living, personal style, and health technology.

Explore lifestyle

More to discover

Gamesupdate24 also covers business, law, travel, and entertainment topics, including reviews and informational articles.

Return to the homepage